Where to Buy R410a Refrigerant Gas for Chiller
| 11.3KG R410A | Certification：CE | ||||
| | Cylinder | Height | Diameter | Thickness | |
| 420mm | 241mm | 1.5mm | |||
| Material | Capacity | Weight | |||
| DC04 | 13.3L | 3.5kg | |||
| Working Pressure | Testing Pressure | Filling Gas | |||
| 2.8Mpa | 3.45Mpa | R410A/R32 | |||
| Gas Purity | 99.91%-99.97% | ||||
| Gas N.W. | 11.3KG/25lb | ||||
| Packing | carton size 24.5*24.5*42.5cm | ||||
| Packing, Payment and Delivery | |||||
| Packing | 1 cylinder/carton, disposable cylinder, OEM design on carton | ||||
| Loading | 1150 cylinders/20ft container, mixing with other refrigerant gas is supported | ||||
| Payment | Normally By T/T 30% as deposit, and the 70% balance against copy of B/L | ||||
| Delivery | within 20 days after receipt of deposit and confirm of carton design | ||||
| | |||||
R410A is a new type of environmentally friendly refrigerant that does not destroy the ozone layer. When cooling or heating, the working pressure is about 1.6 times that of ordinary R22 air conditioners, and the cooling (heating) efficiency is higher. Improve air conditioning performance without destroying the ozone layer. R410A new refrigerant is composed of two quasi-azeotropic mixtures, mainly composed of hydrogen, fluorine and carbon elements (expressed as hfc), which is stable, non-toxic, and superior in performance. At the same time, since it does not contain chlorine, it will not react with ozone, that is, it will not destroy the ozone layer. In addition, the performance of air conditioners using new refrigerants will also be improved to a certain extent. R410A is the most suitable refrigerant to replace R22, which is recognized internationally so far, and it has been popularized in Europe, America, Japan and other countries.
Refrigerant Freon Workshop and Shipment Glance
With the continuous accumulation of manufacturer's experience, R410A gradually enters into large-scale air conditioning systems. Japan's energy efficiency standards are another factor driving this shift. The air conditioner manufacturer redesigned the system for R410A, while using a larger heat exchange area to reduce the condensation temperature, so as to obtain the real benefits of R410A. Because low condensing temperature can improve energy efficiency ratio, and R410A has high efficiency at low condensing temperature, air-conditioning manufacturers have adopted measures to increase the energy efficiency ratio by expanding the heat exchange area of air conditioners when adopting R410A.
| Refrigerant Gas R410a | |
| Physical Properties | |
| Molecular Weight | 72.58 |
| Boiling Point | 101.3KPa(° C) -51.6 |
| Freezing Point | N/M |
| Density 30° C(kg/m3) | 1038 |
| Critical Temperature (° C) | 72.5 |
| Critical Pressure (MPa) | 4.95 |
| ODP | 0 |
| GWP | 2000 |
| Quality Index | |
| Purity | ≥99.90% |
| Water content | ≤0.001% |
| Acidity | ≤0.00001% |
| Evaporation residue | ≤0.01% |
| Chloride content | ≤0.0001% |
| Appearance | Colorless and clear |
| Odor | Odorless |
| Application | |
| As long-term substitute for R-twenty-two, R410A is used mainly in the conditioners and refriger-anting systems. | |
| Packing, Payment and Delivery | |
| Packing | 1. Disposable cylinder: 11.3KG/25lb |
| 2. Refillable cylinder such as 12L/14L/60L etc.. | |
| 3. ISO-TANK | |
| MOQ | 20'GP |
| Payment | 1)By T/T 30% as deposit, the 70% balance against copy of B/L |
| 2)L/C payment term is also negotiable | |
| Delivery | 20-25days after receiving the deposit |
| About Sample | |
| Sample is ok, but refrigerant is dangerous goods in law, ship agent will not accept mixed stuffing with other goods, so the high sea freight and delivery cost is better been taken into consideration. | |
HFC Refrigerant HCFC Refrigerant HC Refrigerant Mapp Gas Helium Gas