High Quality R410A Refrigerant Gas Specification, R410a Price Per Pound

R410a Refrigerant Eco Friendly Freon Gas Cost for Mini Split And Air Conditioning

11.3KG R410A		Certification:DOT/KGS/CE
		Cylinder	Height	Diameter	Thickness
			420mm	241mm	1.5mm
			Material	Capacity	Weight
			DC01	13.3L	3.5kg
			Working Pressure	Testing Pressure	Filling Gas
			2.8Mpa	3.45Mpa	R410A/R32
		Gas Purity	99.91%-99.97%
		Gas N.W.	11.3KG/25lb
		Packing	carton size 24.5*24.5*42.5cm
Packing, Payment and Delivery
Packing	1 cylinder/carton, disposable cylinder,neutral graphic design packing
Loading	1140 cylinders/20ft container
Payment	Normally By T/T 30% as deposit, and the 70% balance against copy of B/L
Delivery	within 20 days after receipt of deposit and confirm of carton design

Comparative analysis of the characteristics of R410A and R32.

1. Thermophysical properties: R32 charging volume can be reduced, only 0.71 times that of R410A. The working pressure of R32 system is higher than R410A, but the maximum increase is not more than 2.6%, which is equivalent to the pressure requirement of R410A system, and R32 system exhausts Compared with R410A, the temperature rises up to 35.3℃.

2. Environmental protection characteristics: ODP value (ozone depletion potential value) is 0, but R32's GWP value (global warming potential value) is moderate, compared with R22, the CO2 emission reduction ratio can reach 77.6%, while R410A is only 2.5% , It is significantly better than R410A in terms of CO2 emission reduction.

3. Safety: Both R32 and R410A are non-toxic, while R32 is combustible. Among several alternatives to R22, R32 and R290, R32 has the highest lower combustion limit, LFL. Although R290 is the most environmentally friendly, it is highly flammable and has a safety level of A3. Therefore, it is required to only charge air conditioners within 2p, and large number air conditioners are restricted.

4. Cycle performance: In terms of theoretical cycle performance, the cooling capacity of the R32 system is 12.6% higher than that of R410A, the power consumption increases by 8.1%, and the overall energy saving is 4.3%. The experimental results also show that the refrigeration system using R32 has a slightly higher energy efficiency ratio than R410A .

R410A refrigerant composition: R32, R125

Mole percentage: R32 accounts for 70%, R125 accounts for 30%

Mass percentage: R32 accounts for 50%, R125 accounts for 50%

UN NO:3163

CAS NO: 354-33-6,75-10-5

Refrigerant Freon Workshop and Shipment Glance

The difference between R410A refrigerant and R134A refrigerant

    Although both are environmentally friendly refrigerants used to replace R22 refrigerant, the two refrigerants have their own characteristics. Let's analyze the differences between R410A refrigerant and R134A refrigerant based on the different characteristics of R134A refrigerant.

    1. R134A refrigerant is a single-component refrigerant, while R410A refrigerant is a mixed refrigerant. (The advantage of mixed refrigerants is that, according to the specific requirements of use, various properties such as flammability, capacity, exhaust temperature and efficiency can be considered, and a refrigerant can be tailored.)

    2. The capacity of R134A refrigerant is smaller than that of R22 refrigerant, and the pressure is also lower than that of R22 refrigerant. Therefore, R134A refrigerant air conditioners with the same capacity need to be equipped with a compressor with a larger displacement, a larger evaporator, and Condenser and piping. This ultimately leads to the manufacture and operation of a system with the same cooling capacity as R22 refrigerant, R134A refrigerant system will require higher costs. R410A refrigerant is not only higher in capacity and pressure than R22 refrigerant, but also 50% to 60% higher in operating pressure. As a result of high pressure and high gas density, not only can compressors with smaller displacements be used, but also pipes and valves with smaller diameters can be used. Therefore, the cost of using R410A refrigerant system is lower.