Availability: | |
---|---|
Quantity: | |
Ningbo, China
USD28 - USD 50
100 bottles
L/C, T/T
11.3KG Disposable Cylinder or Others
2.2
50% of R32 and 50% of R125
75-10-5 & 354-33-6
3163
R410a Refrigerant Eco Friendly Freon Gas Cost for Mini Split And Air Conditioning
11.3KG R410A | Certification:DOT/KGS/CE | ||||
Cylinder | Height | Diameter | Thickness | ||
420mm | 241mm | 1.5mm | |||
Material | Capacity | Weight | |||
DC01 | 13.3L | 3.5kg | |||
Working Pressure | Testing Pressure | Filling Gas | |||
2.8Mpa | 3.45Mpa | R410A/R32 | |||
Gas Purity | 99.91%-99.97% | ||||
Gas N.W. | 11.3KG/25lb | ||||
Packing | carton size 24.5*24.5*42.5cm | ||||
Packing, Payment and Delivery | |||||
Packing | 1 cylinder/carton, disposable cylinder,neutral graphic design packing | ||||
Loading | 1140 cylinders/20ft container | ||||
Payment | Normally By T/T 30% as deposit, and the 70% balance against copy of B/L | ||||
Delivery | within 20 days after receipt of deposit and confirm of carton design | ||||
Compared with R22, the R410A system has a significant advantage: the heat transfer of the evaporator is 35% higher, and the heat transfer of the condenser is 5% higher. Its cycle working pressure is about 57% higher than that of HCFC-22, the refrigeration capacity per unit volume is about 43% larger than that of HCFC-22, the refrigeration coefficient is about 7.7% smaller than that of HCFC-22, and the remaining parameters are basically close to HCFC-22. Under the same mass flow rate, the pressure drop of R410a is relatively small.
Compared with R22 system, R410a's special accessories are: compressor, four-way valve, stop valve, one-way valve, solenoid valve, expansion valve, filter drier, refrigerant charging tank, pressure gauge, pressure hose, vacuum pump Wait. The rest of the accessories can be used in common with R22 when the pressure is met.
R410A refrigerant composition: R32, R125
Mole percentage: R32 accounts for 70%, R125 accounts for 30%
Mass percentage: R32 accounts for 50%, R125 accounts for 50%
UN NO:3163
CAS NO: 354-33-6,75-10-5
Refrigerant Freon Workshop and Shipment Glance
R410a Refrigerant Eco Friendly Freon Gas Cost for Mini Split And Air Conditioning
11.3KG R410A | Certification:DOT/KGS/CE | ||||
Cylinder | Height | Diameter | Thickness | ||
420mm | 241mm | 1.5mm | |||
Material | Capacity | Weight | |||
DC01 | 13.3L | 3.5kg | |||
Working Pressure | Testing Pressure | Filling Gas | |||
2.8Mpa | 3.45Mpa | R410A/R32 | |||
Gas Purity | 99.91%-99.97% | ||||
Gas N.W. | 11.3KG/25lb | ||||
Packing | carton size 24.5*24.5*42.5cm | ||||
Packing, Payment and Delivery | |||||
Packing | 1 cylinder/carton, disposable cylinder,neutral graphic design packing | ||||
Loading | 1140 cylinders/20ft container | ||||
Payment | Normally By T/T 30% as deposit, and the 70% balance against copy of B/L | ||||
Delivery | within 20 days after receipt of deposit and confirm of carton design | ||||
Compared with R22, the R410A system has a significant advantage: the heat transfer of the evaporator is 35% higher, and the heat transfer of the condenser is 5% higher. Its cycle working pressure is about 57% higher than that of HCFC-22, the refrigeration capacity per unit volume is about 43% larger than that of HCFC-22, the refrigeration coefficient is about 7.7% smaller than that of HCFC-22, and the remaining parameters are basically close to HCFC-22. Under the same mass flow rate, the pressure drop of R410a is relatively small.
Compared with R22 system, R410a's special accessories are: compressor, four-way valve, stop valve, one-way valve, solenoid valve, expansion valve, filter drier, refrigerant charging tank, pressure gauge, pressure hose, vacuum pump Wait. The rest of the accessories can be used in common with R22 when the pressure is met.
R410A refrigerant composition: R32, R125
Mole percentage: R32 accounts for 70%, R125 accounts for 30%
Mass percentage: R32 accounts for 50%, R125 accounts for 50%
UN NO:3163
CAS NO: 354-33-6,75-10-5
Refrigerant Freon Workshop and Shipment Glance